Home » Computer Engineering » DESIGN AND IMPLEMENT A MICROCONTROLLER BASED MULTIPURPOSE SECURITY DEVICE WITH D...
DESIGN AND IMPLEMENT A MICROCONTROLLER BASED MULTIPURPOSE SECURITY DEVICE WITH DIRECTION CAPABLE OF SECURING A MILITARY CANTONMENT FROM INTRUDER LOCATION AND DETECTION AND TO CONTROL ACCESS TO A STRONG ROOM IN THE CANTONMENT.
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 7,973 times
Delivery: Within 24 hoursDESIGN AND IMPLEMENT A MICROCONTROLLER BASED MULTIPURPOSE SECURITY DEVICE WITH DIRECTION CAPABLE OF SECURING A MILITARY CANTONMENT FROM INTRUDER LOCATION AND DETECTION AND TO CONTROL ACCESS TO A STRONG ROOM IN THE CANTONMENT
CHAPTER ONE
INTRODUCTION
1.1. Background of the Study
The industrial Electronics has changed the whole field of Engineering and technology is occurring so rapidly, even in developing countries. It is so because newer technologies overcome older ones. After the industrial revolution the world shifted towards the information age with the development of computers during the1950's.
As such, mechantronics means the principle that combines the application of mechanical and electrical means has taken over the greater part of industrial electronics which is indispensable in modern technology.
In Nigeria, security which is one of the basic lookouts in any productive firm, has been on the decrease. Most industries have gone bankrupt because of their inability to meet up to the security standard required in a modern day setting. Equally, some homes and offices have lost important documents and properties due to easy access that criminals have. There is thus an urgent need for significant security measures to improve the standard of living of the people, enhance development and put to a stop the menace of insecurity. That is the reason as a student of Computer System Engineering the project named "Intruder Detector Alarm System with direction”, was embarked on.
1.2 General Description of the Project
This electronic system consists of four sensors made up of opto couplers realized with combination of Laser beam, from Laser diode coupled into a cadmium sulfide photocell (C.D.S photocell).
This component serves as an electronic eye, the output of opto couplers conditioned by a Schmitt trigger NAND gate control Logic (74 Ls 132) TTL chip. The output of the 132 chips is used to trigger one short delay which reset an astable multi-vibrator which generates the frequency that is used to drive the buzzer alarm. Each of the sensor output is fed to a BCD to decimal priority encoder whose output is decoded to a format that can be displayed using a seven-segment display (common anode). The buzzer is interfaced through a single transistor static switch.
The entire system is designed in such a manner that whenever somebody wants to gain entrance through the back door, the electronic eyes (optocoupler) installed at the locations respectively senses the presence and triggers a buzzer alarm at the security department of the cantonment and seven-segment display shows the exact location of the intruder.
1.3 Aim and Objectives of the Project
1. The major aim of this project is to design and implement a microcontroller based multipurpose security device with direction capable of securing a military cantonment from intruder location and detection and to control access to a strong room in the cantonment.
2. Another objective of this project is to ground the graduating student in electronic system design and implementation involving Random logic.
3. This project is also aimed at acquainting the young engineers with skills for engineering, technical and scientific writing which is very indispensable in their professional practice.
4. Another aim of this project is to familiarize these graduating students with electronic system designs that have real life application in industrial security.
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
BIOMETRIC AUTHENTICATION OF AN AUTOMATED TELLER MACHINE USING FINGER PRINT AND PASSWORD
CHAPTER ONE INTRODUCTION 1.1 Background to the Study In the olden days, financial institution in Nigeria did almost all their t...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 2.
UNIVERSITY SMS RESULT DESSIMINATION
ABSTRACT This paper reviews the use of mobile phones for delivering examination results via Short Messaging Service (SMS) in a university where studen...More »
Item Type: Project Material | 65 pages | 14,453 engagements |
- 3.
REMOTE MONITORING AND CONTROL OF A REFRIGERATOR USING GSM INTERFACE
ABSTRACT The technology regarding controlling devices and circuits is developing at a faster pace day by day. This project has applications similar to...More »
Item Type: Project Material | 65 pages | 10,456 engagements |
- 4.
DEVELOPMENT OF A MOBILE AGENT FOR PREVENTING SOFTWARE PIRACY ON A NETWORK
CHAPTER ONE INTRODUCTION 1.1 INTRODUCTION Software piracy has affected the growth and the profitability of the software industry. It causes so much ha...More »
Item Type: Project Material | 48 pages | 10,229 engagements |
- 5.
DESIGN AND IMPLEMENTATION OF FINGERPRINT BASED ATTENDANCE MANAGEMENT SYSTEM FOR TERTIARY INSTITUTION...
ABSTRACT The implementation of the biometric based attendance system constrained by our scope and objectives was successfully achieved using the wat...More »
Item Type: Project Material | 65 pages | 16,038 engagements |
- 6.
DESIGN AND IMPLEMENTATION OF AN ONLINE PORTAL REGISTRATION
BACKGROUND OF THE STUDY 1.1 INTRODUCTIONThe term portal is known as links page which presents information from diverse sources in a unifie...More »
Item Type: Project Material | 65 pages | 10,998 engagements |